The laser axis diameter measuring instrument, high precision measuring device by laser scanning principle of non-contact on-line measurement, it is in the two direction (X axis and Y axis) and measure the diameter, suitable for measurement and control on the metal wire material, glass tube, hose, wire and cable diameter, bidirectional measurement at the same time, the average the value that overcomes the one-way gauge to measure not circular defects, which can display wire, pipe diameter and roundness.

Model: LDM25XY LDM50XY LDM60XY
Product use: measuring the outer diameter, non roundness and beating of cable and wire.
Method of measurement: laser scanning
Laser: Red visible semiconductor laser
Laser output: Power: <2mW
Working voltage: ~220V + 10% 50 - 60Hz
Working temperature: -10~40 C
Ambient humidity: <95%RH non condensation
Mode of work: continuous
Power consumption: <30W
Shape size: LDM25XY/LDM50XY measuring head: 400x400x80mm (without support)
LDM60XY measuring head: 372x360x60mm (without scaffold)

Stents: 350x200x (700-1000) mm
Measured position center high: 900 - 1200mm adjustable

Characteristic：
It can connect PLC, industrial control machine, special controller, and can connect large screen display.
It can be connected with PROFIBUS-DP and MODBUS converter with PLC and industrial control machine.
The remote controller DDC-2, DDC-3 and DDC-5 can be equipped with automatic feedback control for extruders and tractors, so that the outer diameter can be controlled within the tolerance range, and the product quality and consumption can be reduced.