Product introduction:

The medium frequency induction heater adopts the principle of induction heating to preheat all kinds of metal conductors on line annealing. In a production line, can significantly improve the adhesion of coat and conductor. During the preheating process, the preheating temperature is greater than 150 degrees, which makes the water vapor dry on the conductor, and the molecular structure of the object is activated and soft, and it is obviously improved to the quality of the brightness, bubble and attachment structure. Compared with the oven heating tube heating equipment, it has over 60% of electricity and the principle of induction heating is less damage to wire performance, less resistance to preheating conductor, hard to stretch, output preheating, automatic speed tracking, and temperature consistency. It is beautiful in appearance, convenient in use, stable in performance and economical in price. At present, it is the most widely used equipment for cable manufacturers.

Applicable scope and use:
The medium frequency induction heater adopts the principle of induction heating to preheat all kinds of metal conductors on line annealing.

Model and parameters:
Model: medium frequency induction preheater

Parameters:
Preheating capacity: 5KVA
Use power: AC220V/380V 50HZ
Applicable line diameter: 0.5-1.2mm
Use line speed: 300m/min