Product introduction:

1. pre operation of DC spark machine test machine:
2. installation position to ensure the control box reserve waterproof problem;
The 3. input power supply is the current 220V and the standard bottom line.
4. please ensure that the high voltage electrode is connected with the console and the whole line of production line in series.
5. yellow button light for manual reset, not bright for automatic reset;
6. the red button is a manual reset button.

Panel function setting of DC spark test machine

1. close the backplane ON/OFF power switch.
2. open the ON/OFF power switch on the backboard and keep the RESET button
The 3. digital voltmeter and counter will display the CONSYS, indicating that the RESET button can be released when the function can be set at this time.
4. the four main functions (Function) Lch, rUF, PCd and ELE listed on the next page function list will display on the counter, and the corresponding selection function (Option) will be displayed on the voltmeter.
5. and VOLTAGE ADJUST) with voltage regulation (3) (France) under the keys can be selected to the function of the (Option).
6. to set the next main function (Function) and COUNTER RESET button, the function symbols will be displayed on the counter, and the corresponding selection function (Option) will be displayed on the voltmeter and the voltage regulation (VOLTAGE ADJUST) with (3) (France) under the keys, can get to the selection function (Option).
7. repeat the above steps, other main work (Function) and corresponding selection function (Option) can be set.
8. when all the functions are set, the RESET button is set to the system and the voltage is set.